Tired of the same old tiled backsplashes? Try something different like a herringbone shim backsplash. Cut the shims to size and then create the middle section starting at the center line. Glue down the section and let it sit for several hours. Then, once you apply it onto the wall, you can start adding all the filler pieces. It’s important to measure correctly.
Decide on a size for your painted tiles. Then make tiny pencil marks on the wall to know where the grout lines should go. After that, make the horizontal lines and start taping and painting. It’s tricky and you need lots of spare time for a project like this but it’s also really original.
This next backsplash does resemble one we described earlier, but the stones used are a different size and are installed using a very different technique. These little stones cost around $2.50 per square foot so expensive is not part of the equation. If you want to do this or something similar, the effort required for this DIY project is less than you might expect to create the finished wall you see here.
Lucy Lacroix Kitchen Backsplashes Wednesday November 29th, 2017 22:26:29 PM
Hit One of The Thumbnails Below to Get More Kitchen Backsplashes Ideas
Wednesday November 29th, 2017 22:26:29 PM